Product Description
568-929 Mitutoyo Borematic Absolute Digimatic Snap Open Bore Gage Set: .500-1.00″/12.7-25.4mm
The Mitutoyo
568-929 Borematic Snap Open Bore Gage has the following specifications:
- Range: .500-1.00″/12.7-25.4mm
- Resolution: .00005″/.001mm
- Interchangeable Head Set
The Mitutoyo Borematic Absolute Digimatic Snap Bore Gages are one of the most popular three-point bore gages available on the market today. The borematic series incorporates a snap open lever to control the movement of the measuring anvils. The lever style readout saves users a lot of time compared to using a micrometer style readout where users have to continuously turn the thimble to retract or let the anvils out of the measuring head. The snap open lever style readout creates better repeatability among users. The Borematic enables the operator to take measurements more accurately and quicker than ever before. The electronics in the borematic bore gages will retain the setting for the origin point for the entire battery life which saves time as users to not have to input the preset into the electronics each time they are going to use the bore gage. The display can also be rotated 330° which is helpful for users trying to read the diameter at any angle.
The Mitutoyo
568-929 borematic bore gage set includes the following :
- Display Unit 568-015
- 04AZA721 Head Assembly: .500-.650″/12.70-16.51mm
- 04AZA722 Head Assembly: .650-.800″/16.51-20.32mm
- 04AZA730 Head Assembly: .800-1.00″/20.32-25.40mm
- 177-182 Setting Ring: .650″
- 177-287 Setting Ring: .800″
This Borematic Snap Open Bore Gage Set is the “interchangeable head” style. There is only one readout included in this set and the operator must interchange or swap out the different measuring heads. Each time a different head is installed on the readout, the operator must calibrate the new head in a setting ring prior to taking bore measurements.
Features:
- Available in Metric and Metric/Inch models
- Optional extension rod allows for measuring deep holes
- Optional setting rings for zero point adjustment are available
- Contact points are constructed of TiN for impact resistance and better durability
- Design allows for measurements closer to the bottom of blind bore holes
- SPC output function offers quick and easy data management in real time
- ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
- Elimination of overspeed errors provides a higher measurement reliability and repeatability
- Functions include Zero/ABS Setting, GO/NO-GO judgment, power On/Off, and inch/mm conversion (on inch/metric models only)
- Supplied in fitted wooden case
The
Mitutoyo Borematic snap-on bore gage features an activation handle with a precision-balanced spring that smoothly retracts the anvils when pressed. Titanium Nitride (TiN) coated measuring contact points provide excellent durability and impact resistance which allows the instrument to measure to the bottom of a blind hole. With the ABSOLUTE encoder, once the origin point of the
568-929 is set with the ORIGIN button, the Borematic retains the setting for the entire battery life. Repeated origin setting (presetting) is no longer necessary. The Mitutoyo Borematic ABS Digimatic snap-open bore gage offers accurate bore measurements quicker and easier than ever before. Measurements are displayed on a large LCD readout that rotates 330° for easy reading in any instrument orientation.
